GRC line light partition board after installation to wall plastering treatment

Company production of GRC components, EPS lines, gypsum blocks, GRC European components, EPS decorative lines, EPS foam lines, high strength light straw insulation board, flue gas, roof heat insulation sandwich board series building decoration products professional manufacturers. Quality assurance, can be assured to buy. Here we introduce the GRC lightweight partition board after the installation of the wall plastering treatment.

(1) GRC lightweight partition board installation, wall dry surface wipe ash and joint treatment can be carried out.

(2) plaster before water washed wet wall, the nap in the wall surface is coated over 107 glue cement mortar with paint roller, to prevent the shelling. To be completely dry, with ordinary cement mortar for plastering, but must be away from the beam, plate 1-2mm.

(3) the plastering mortar must choose the medium coarse sand and mixed plasticizer, strictly according to the proportion, mixing evenly, plastering mortar water cement ratio can not be too large, otherwise after evaporation of voids are formed, especially cement mortar of high strength and fine sand, will impel the primary cracking.

(4) should do waterproofing treatment of kitchen and toilet partitions, 1500mm height above ground of lightweight partition board surface should be coated with a waterproof agent, to pay special attention to the key parts of the foot plate and pipe wellhead waterproof processing, import and export of the rest of the pipe shall be doing waterproof treatment.